Search

PVC Compound

PRODUCTS > Packaging Grade > PVC Compound
    • 1

PVC Compound

1. Cost Efficiency

2. Ease of Installation

3. Durability and Strength

4. Resistance to Weatherization

Introduction

1. Cost Efficiency
2. Ease of Installation
3. Durability and Strength
4. Resistance to Weatherization

PVC Compound

1. Cost Efficiency

2. Ease of Installation

3. Durability and Strength

4. Resistance to Weatherization

5. Flame Resistance Properties

6. Ease of Processing/Blending

7. Resistance to Grease, Oil and Chemicals

8. Chemically Stable and does not De-polymerize  

9. Electrical Insulation Properties (ideal for use in wire and cables)

Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

PLA

Polylactic acid (PLA) is a new type of biodegradable material made from starch raw materials proposed from renewable plant resources such as corn. Starch raw materials are fermented to produce lactic acid, which is then converted into polylactic acid through chemical synthesis. It has good biodegradability and can be completely degraded by microorganisms in nature after use, ultimately generating carbon dioxide and water without polluting the environment. This is very beneficial for protecting the environment and is recognized as an environmentally friendly material.

LDPE

LDPE is a soft, flexible, and lightweight thermoplastic known for its excellent clarity, good chemical resistance, and ease of processing. It has a high degree of branching, which gives it lower density and less crystallinity compared to HDPE and LLDPE. LDPE is widely used in film extrusion, coating, and molding applications where flexibility and transparency are important.

LLDPE

LLDPE is a flexible, durable thermoplastic known for its high tensile strength, excellent puncture resistance, and good environmental stress crack resistance. Compared to LDPE, LLDPE offers better impact strength and elongation properties while maintaining good flexibility. It is widely used in film extrusion applications and is compatible with most conventional polyethylene processing equipment.

EPS

EPS is a rigid, lightweight cellular foam material produced from polystyrene beads that expand when exposed to steam. It offers excellent thermal insulation, high shock absorption, and low moisture uptake. EPS is widely used in construction, protective packaging, and disposable food containers due to its durability, weight savings, and cost-effectiveness. It is fully recyclable and can be reprocessed into new polystyrene products.

TPU

TPU is a high-performance elastomer combining the strength of plastic with the flexibility of rubber. It offers excellent abrasion resistance, oil and grease resistance, and good low-temperature flexibility. TPU is widely used in injection molding, extrusion, and blow molding applications across automotive, industrial, and consumer goods sectors.

PBS

1. Natural fibrous by-product of Powder Straw Material Resin processing, a renewable plant-based material 2. Fine, compact fibers ideal for molding, delivering high strength and deformation resistance 3. Fully biodegradable and compostable, no plastic pollution 4. Free of plastic, heavy metals and fluorescent agents, food-safe 5. Abundant supply, low-carbon, and a sustainable agricultural waste reuse solution

POM

POM is a high-performance engineering thermoplastic known for its excellent dimensional stability, high stiffness, low friction, and good wear resistance. It is commonly used as a metal replacement in precision parts that require high mechanical strength and low moisture absorption. POM performs well in applications involving moving components and exposure to fuels or solvents.

PBT

PBT is a semi-crystalline engineering thermoplastic known for its excellent mechanical strength, high heat resistance, good electrical insulation properties, and fast crystallization rate. It offers low moisture absorption and good dimensional stability, making it an ideal material for precision components in automotive, electrical, and electronic applications. PBT is often reinforced with glass fiber to further enhance strength and stiffness.

PC

PC is a high-performance amorphous engineering thermoplastic known for its exceptional impact strength, high transparency, and good heat resistance. It offers excellent dimensional stability and electrical insulation properties. PC is widely used in applications requiring optical clarity and mechanical toughness, such as automotive components, electronic housings, medical devices, and protective equipment.

HDPE

HDPE is a strong, durable, and lightweight thermoplastic known for its high tensile strength, excellent chemical resistance, and low moisture absorption. It has a linear structure with minimal branching, giving it higher density and greater crystallinity compared to LDPE and LLDPE. HDPE is widely used in rigid packaging, piping, and industrial applications where strength and durability are required.

PA Pa6 Pa66

PA6 is a widely used engineering thermoplastic known for its good mechanical strength, high impact resistance, excellent wear resistance, and good chemical stability. It absorbs moisture more readily than PA66, which can affect dimensional stability but also improves toughness. PA6 is easy to process and suitable for a variety of injection molding and extrusion applications.

EVA

EVA is a flexible, rubber-like thermoplastic copolymer of ethylene and vinyl acetate. It offers excellent toughness, low-temperature flexibility, good transparency (in certain grades), and strong adhesion properties. As the vinyl acetate (VA) content increases, EVA becomes softer, more flexible, and more elastic, with improved clarity and lower melting point. EVA is widely used in foam, film, adhesive, and extrusion coating applications where flexibility, impact resistance, and transparency are valued.

PET

PET is a strong, lightweight thermoplastic known for its excellent clarity, high tensile strength, good chemical resistance, and recyclability. It is widely used in packaging, fiber, and engineering applications. PET is one of the most common plastics for food-contact applications due to its safety and barrier properties against moisture and oxygen.

GPPS

GPPS is a transparent, rigid, and brittle amorphous thermoplastic known for its excellent optical clarity, good dimensional stability, and ease of processing. It has low water absorption and good electrical insulation properties. Unlike HIPS, GPPS does not contain rubber impact modifiers, so it offers high stiffness and gloss but lower impact resistance. GPPS is widely used in applications requiring transparency and rigidity, such as disposable tableware, packaging, and consumer goods.

ABS

ABS is a tough, rigid, and impact-resistant engineering thermoplastic with good mechanical strength, excellent surface finish, and high dimensional stability. It is a terpolymer that combines the rigidity of styrene, the chemical resistance of acrylonitrile, and the toughness of butadiene rubber. ABS is widely used in automotive, electronics, consumer goods, and industrial applications where a balance of strength, aesthetics, and processability is required.

PBAT

PBAT is a thermoplastic biodegradable plastic, which is a copolymer of butylene adipate and butylene terephthalate. It has the characteristics of PBA and PBT, and has good ductility and elongation at break, as well as good heat resistance and impact performance. In addition, it also has excellent biodegradability and is one of the best degradable materials for biodegradable plastics research and market application.

PP

PP is a lightweight, semi-crystalline thermoplastic known for its excellent chemical resistance, high melting point, and good fatigue resistance. It is widely used in packaging, automotive parts, household goods, and industrial applications. PP is easy to process and recyclable, making it a popular choice for both injection molding and extrusion.

Polyvinyl alcohol PVA

PVA is a water-soluble, biodegradable synthetic polymer known for its excellent film-forming properties, emulsifying ability, and high tensile strength. It is widely used in packaging, textile, paper, adhesive, and construction industries. Unlike most thermoplastics, PVA can be dissolved in water depending on its degree of hydrolysis and polymerization, making it an environmentally friendly choice for various applications.

HIPS

HIPS is a modified version of GPPS (general purpose polystyrene) with added rubber (polybutadiene) to significantly improve impact resistance while maintaining good processability and dimensional stability. It offers a balanced combination of mechanical strength, stiffness, and ease of fabrication. HIPS is widely used in applications requiring moderate strength and good surface finish for printing or painting.

PLA

Polylactic acid (PLA) is a new type of biodegradable material made from starch raw materials proposed from renewable plant resources such as corn. Starch raw materials are fermented to produce lactic acid, which is then converted into polylactic acid through chemical synthesis. It has good biodegradability and can be completely degraded by microorganisms in nature after use, ultimately generating carbon dioxide and water without polluting the environment. This is very beneficial for protecting the environment and is recognized as an environmentally friendly material.
Previous： PBAT
Next： TPU
Return
About Us

Yiwu Juyang Trading Co., Ltd. supplies high-quality plastic granules including PP, PE, ABS, PS, PET, and PVC. We offer stable supply, competitive factory-direct pricing, and reliable global shipping to support manufacturers worldwide.

Products
News
Contact Us

© 2025 Yiwu Juyang Trading Co., Ltd. All rights reserved. | sitemap.xml

TOP
+86 17333427282
8617333427282